02Geek HTML5 and JavaScript, TypeScript, React, Flash, ActionScript online School
Previous VideoNext Video

From Theory to action

After all this talk lets make it happen. Breath deep and lets jump into finding the actual points that our dot is between.

Video Transcript

00:00So my X is changing that means is X or you know what let's call it
00:05Let's do it with the with the Y. Well, let's do it the X is X for us will mean that
00:11This is what's not moving is X is what's not moving. Okay. Now if is X is not true. That means the Y is moving
00:18All right
00:18So now we know what direction we're going the last thing that's left for us is the last thing that is left for us
00:24It's to cycle through the corners to search for the actual actually for the dot that hasn't that is the dot that's being changed
00:31Alright, so let's see how that is gonna roll. So first of all, I want to go to my corners that was just created and
00:39I want to run through and I just go back down here into our get line first want to create my length
00:48Which is an integer could get the length then we're gonna loop through
00:52I'm going to loop through the corners
00:58Now the reason why I'm putting the length inside of a separate variable is because the length is the function
01:05We started learning about getters and setters. So now that we know that length is the function our loop is going to call that function a
01:13Lot of times now if I just put into a variable now, I don't have to call a function that takes less on the system
01:20Automatically, I just saved some for my system. So this is really just about her keeping this keeping our code more efficient
01:27All right, so I'm in my for loop. Now the next step for me is I could ask here if
01:32Our is X is true. Then what do we want to do?
01:35We want to test to see if our X has changed if our Y is true
01:40Then we want to test if our Y has changed now, we could use an if statement or we could use a
01:46Different mythology, but let's start with the let's start using an if and then we might change it, right?
01:51So with an if statement, what would we put in our if so we have your our dot which is our new?
01:55The corners I we're in a specific dot right now
01:59What do we want to know because we know that the X is not changing. We want to know if they're if our X
02:08Correlates to the X inside of our application. So if I take that X I could ask it if it equals to my
02:16Point dot X we could trace that out
02:23Just so we could see it. Let me just put here a little comma here
02:29So we could look at it
02:30So we're only testing X because now we know that it's going to be X true
02:35Hopefully and let's see. Let's just fix any errors we have here
02:39Expecting a semicolon because we didn't put here an equal
02:42Run it one more time. Alright, so let's see how it works. So if we stop this just for a second
02:49So first of all, we're let's let's see what's going on here
02:51First of all, we're testing the wrong thing right because we need the Y and we're testing the X
02:57So so our logic is is some sort of some issue in our our is X
03:02Is not the right thing, right? So we basically wanted to do this only
03:06What we wanted to do if it is the X we wanted to test the Y
03:10So we're gonna do that to the Y instead. That was our mistake
03:13so if our X is not changing we want to change we want to check if our we want to check our Y and
03:22Here we go. So
03:24There we go. So first of all
03:26We have here a false false and then we have a true and a true
03:29Why do we have a true and a true because our Y?
03:33478 is true both here and here now
03:37That's so far so good, but that doesn't really give us our dots
03:42Right because even though our Y is 478 or maybe it does right if we look at our application currently at this second
03:48It does but that that's not gonna fly
03:51the reason is that the reason why this is not going to fly is because
03:56Currently when we have only a square and we got those two dots. We got C and D here. It's true right now
04:02We are really here and we are really between C and D
04:07Unfortunately as our application gets more
04:10You know more built and we have already a square here. And if I try to start from here
04:16I'm still gonna get true for this and I'm still gonna get true for this
04:20So it's not good enough. It is good. Definitely. We're in a good shape
04:24We were definitely in a good place that we know that our X is definitely
04:28Probably is probably between these two points is probably between our Y
04:35Are between our Y and X between 2 and 3 18
04:40Unfortunately for us though, we don't know if it's a guaranteed slam dunk
04:45Alright, so the next step for us is actually to confirm also our X position to confirm that our position is really between those two dots
04:53And there aren't any other well
04:56we don't even have to worry about other dots because if we go through the cycle and our dot is our X is between
05:03This value and that value if it's between this and that value then I don't really care. There's others
05:09Now if it's not between those two values, then I do care
05:13So my next test my next question would have to be if my X 155 is between 2 and 3 18
05:21How are we gonna do that?
05:22So the easiest way to do it because we know that if our dot is true
05:27We could assume that the next dot is true as well. If there is a next dot now
05:32If there isn't an X dot then we have a problem, but because our loop will complete before the length is over
05:39We could almost make an assumption, but not really where we're very close to making assumptions show
05:45Assumption, but one thing that we could do just to make our lives easier instead of adding here extra logic
05:50We could go back into our application and just add one extra dot of virtual dot that doesn't really exist
05:57This virtual that will be just the initial dot that we started with that way even if we do find a dot
06:03That's like towards the end such as let's say this is going to be zero
06:07There's gonna be between between these two dots between this dot and that dot
06:11But we don't we didn't have a relationship here because our array was ended our vector is over
06:18So we just lended the dot that is just going to be there because it makes our life easier
06:22So it's kind of an overlapping dot
06:24It's the same that as the first one and the reason why we're doing that is because we want to keep our our code
06:29We want to keep our function right here that we're working on the get line
06:33We want to keep it simple now in our scenario back to our code
06:37We know that y and y are true the next thing that we want to ask we want to make sure that end
06:43We want to make sure what we want to make sure that our dot is between those two dots now. How could we do that?
06:50The best way we could do that is we could probably first of all
06:55We want to align them based on the right order right so we if we're gonna if we're gonna take a value
07:00And this value is let's say this is 50 is 30 and we're at 40
07:06now we might ask if 50 is greater than 30 and
07:11is smaller than 80
07:14Or another way around it could be either either this either
07:18It's bigger than this and smaller than that or smaller than that and equal to that so it has to be in this range
07:24basically
07:26To be able to find a range the best way for us is instead of doing this calculation is we could say this is our
07:32Find the smaller number the smaller number is going to be our starting point
07:37We'll subtract the two values will subtract the value from the highest worse if this is 30
07:44We'll subtract 30 from C 30 from our middle number, and then we'll just make sure that our number is smaller than C
07:51Because that would that would probably be the easiest way for us to solve this without adding a without creating a complicated if statement
07:58All right, so let's try this now. You might have a better solution, which I obviously strongly recommend that you
08:05Put it up and show and show it to us, but let's see what we're doing so first of all what I want to do is
08:10I'm going to create a variable just as we said and a variable is going to be a really simple
08:17integer a simple number, so it's going to be an
08:20Number and that number is going to be a math
08:27floor no math
08:30min
08:31Where in math min is going to we're going to take two values or?
08:35our v Corners X or
08:40our v Corners I plus one and now because we know and we probably need to make sure now that we're going through the length
08:46That will go through length minus one because we added one item that we don't want to cross
08:51Okay, and that will enable us to make sure that we never get an error
08:55So we want to make sure that we want to take our X. We want to take our Y. We're sorry X in the
09:00current point and the next point and
09:06When we take these two points we want to end and by the way we also
09:11Going back to this we want to make sure that if our Y here is true
09:14But not only that is a true that and is a true also for the next one right because that's what we just did
09:20When we're showing in the sample, so we only want to take only want to take the point when it's true on both directions
09:26Not only we want to take it when it's true on both those directions
09:29We want to take it also when the value is between those two digits that we're going to see in a second
09:34alright, so and
09:37We have our minimum value, so we got ourselves that little minimum now. We could trace on top of that put your little
09:46What do we want to trace on top of that?
09:47We want to take our current point, and we want to ask is our current point in the range of our?
10:00two dots, but sorry for
10:04Scrambling there for a second, okay, so let's see how this works
10:06So we already know the smallest number
10:09Now we just have to take the biggest number subtract the biggest from the smallest then we have our range
10:14After we have our range we could subtract the smallest number and just make sure that we're still inside of that range now because our
10:21Values are always positive inside of our flash because we're in the positive area
10:27We don't have to worry about negatives at all because there aren't negatives everything everything in our application starts from zero zero
10:34And it's always positive the negatives are outside of my screen
10:37So I don't have to worry about negatives which makes my life easier, so I don't even have to worry about negatives
10:42So the next value here is I want to take my I'm just going to break it down because I make it easier
10:46So this is going to be a top about top value
10:50Just going to be a number as well. What do I want to do? I want to take my
10:56Max number for the same two here, and I could subtract from that max the number which is the number that we've just got here
11:06Now I have my range because I now I have the number where it started from and I have my my
11:12range of numbers last step that I have left is actually to take my current
11:20Last step that I have left is to take my current x-position in my point so I could take my point there px and
11:28then what I want to do is I want to check to see if it's
11:32smaller or equal
11:35to that range
11:37This price should call this range if it's smaller or equal to range then we're good. We're completely good. So let's let's see this just
11:47running so we're on our application just one more time, and let's see what's going on here, so first of all
11:57We first test to see if our dot and we're seeing this in our trees first of all
12:01We're testing to see if we're in between the two dots that are
12:050 2 and 3 18 no are we between 3 18 and 3 18 no are we between 3 18?
12:12478 and 478 yes, we are
12:16Okay
12:16So this now, let's just condense all this what we just created here
12:20So now that we could condense all this we really want to ask a simple question
12:24our simple question basically is if
12:28if we if we are true to this and we are true to that
12:35Then we're then we're rolling right so we don't really even need to do this if that's not true
12:40So we can even just start here if that is true
12:45All right, so if that is true
12:47and we could probably hear another if statement if
12:55The range is true
13:00If that is true
13:01Let's just trace out just quickly something and we will fix it later on if that is true
13:06Then what do we want to trace out? We want to trace out the two dots that were in between
13:10So we want to trace out I and I plus plus
13:14High plus one we don't want to upgrade I so let's see this
13:18Run our application one more time and here we go
13:22So now we got the values that we care about now
13:24We know that we're between the two dots two and three zero one two three. So we know we're between dots two and three
13:30That's where we're starting

Ready to Level Up Your Skills?

Join thousands of learners on 02GEEK and start your journey to becoming a coding expert today!

Enroll Now for Free!