Editing Array Data
How to change data in an array. That's what we are looking into in this video.
Video Transcript
00:00In our last example,
00:01we've ended by just approaching our data,
00:04and I've created a quick little two new arrays
00:07similar to the way we worked before.
00:09So our first array is a list of our users,
00:11while the second array is a list of permission levels.
00:15Because the site has only two different permission levels,
00:18I just set it as true or false
00:19using our Boolean values that we've met in earlier chapters.
00:23So with our Boolean values,
00:24let's start ahead and just create a little function here
00:27that would just retrieve that information.
00:29So I'm going to create a function
00:30which will be called message user.
00:33It would accept an ID, which would be a uint.
00:37It would not return anything.
00:40And because I'm working with CS5,
00:42it automatically closes the bracket for me.
00:45But you want to make sure if you're working
00:46in earlier versions,
00:47that your bracket that you open, you close.
00:51Okay, so now that we got our user ID,
00:53let's just trace out just our ID
00:56and just call that just for a second
00:58before we start even manipulating anything.
01:00So we're going to call message user.
01:04And we're going to send it an ID.
01:05And in this scenario, I just want to output my Ben message.
01:08So I'm going to send zero.
01:09Right now we should just get an output of ID,
01:11which would be zero, and we're getting that.
01:14Next up, what I want to do is, as we said,
01:16let's just output the two values,
01:18the data of the user and the level of the user.
01:21So the first thing we want to do
01:22is we want to call a users.
01:24And as we've done before,
01:25we're going to open a bracket, a square bracket.
01:28We're going to send in our ID.
01:30We're going to close that bracket.
01:31Then I'm going to put a comma right here.
01:33And we're going to ask for our user level as well.
01:36And exactly in the same way, we're going to send that ID.
01:39And let's run our application
01:41and just see that we're retrieving the data
01:43and we are receiving Ben and we're receiving the value true.
01:47Now that we know we're getting those messages,
01:49let's put here an if else statement
01:50based on the value of our a user's level.
01:53So if our user is a true user, which is in the higher level,
01:57we could just grab this data
01:59or just type it a user level ID.
02:02And I don't really put your any question in my if statement
02:04because my array already contains the answer, true or false.
02:08So I don't need to put here anything special,
02:10just directly the variable.
02:11And if the variable comes as true,
02:13it would output whatever's inside of that if statement.
02:16And if not, it wouldn't.
02:18So let's put here an else so we could output something else.
02:21So let's just change our trace to a low Ben
02:30and let's add here another message.
02:32So let's just have here.
02:35And because we know it's already that level,
02:37we don't have to type all that in.
02:39And we're just going to say, you have rights.
02:46And on the other hand,
02:47let's just copy the same thing
02:50and trace out to user that doesn't have their level,
02:52you don't have rights.
02:57Kind of basic, let's run this and just see if it works.
02:59And we see that I have your little error,
03:01let's see what that is.
03:02And we can see that I'm missing the plus sign right here.
03:05So as you see, it's telling syntax error,
03:07expecting right parameter before you have rights.
03:10So if I come here, I could see
03:11it's expecting a right parameter,
03:12which means if I wanted to extend it,
03:14I need to add a plus or a comma as we've said earlier.
03:18Let's run this one more time.
03:20And by the way, I fixed it to both lines
03:22because I copy pasted it.
03:24And you can see a low Ben you have rights.
03:25Let's try another user that doesn't have rights
03:27and Dan doesn't have rights.
03:29So I'm just going to replace the value zero to one
03:31because Dan is false.
03:33Let's just make sure that Dan continues to be false.
03:36Perfect, so right now we created a sample
03:38that's very similar to the one that we worked on before.
03:41Let's see how we could change the data of users.
03:44So if for example, we want to change directly Dan's value,
03:48we could just go directly to a user level.
03:51And we could change the value directly
03:53and just say to value number one, right?
03:55Because Dan is number one.
03:57We want to make value number one true.
04:00Thus, if we make it true, obviously if we run it
04:02because we're retracing the message before we change it,
04:04then we won't see any difference, right?
04:06We're still going to see that he's false.
04:09But if we then trace our message one more time,
04:14after we create our new function,
04:16let me just open that up again so we could see it.
04:19So if I change it and then call it again,
04:21we're going to see that our second trace line
04:23should then output you have rights, okay?
04:26So now we've changed Dan.
04:27Let's just wrap that into a function
04:29that enables us to change properties of a user.
04:33So let's create here a quick function
04:34and we're going to call it function, change user level,
04:41which would accept an ID as well, right?
04:45It would not return anything
04:46because it would directly change that value.
04:49So how would we change the value?
04:50Again, we could just grab what we've just done here
04:53and we're already seeing that we're missing something
04:55because we don't want to always set it to true.
04:57So we want to add another property here, right?
04:59Another attribute.
05:01And that attribute will be is right.
05:09Yeah, why not?
05:10Is right.
05:11And is right would be a Boolean.
05:15And let's see what we have to change here.
05:17So one, we want to change our one to be ID.
05:19We want to change is right to be the value
05:23that's coming in from our change user level.
05:25So we created now a quick function
05:27that changes the user level.
05:29The next thing that we want to do
05:30instead of changing the user level directly,
05:33let's just comment that out.
05:36We can now call our function and send it.
05:41We want to change user level one
05:43and want to change this value to be true.
05:45Now, basically this is the exact same thing
05:47as the line before
05:48and although we're adding a few more lines of code,
05:50we're making it easier for us to change many users.
05:54So now if we wanted to change it to user level one,
05:59we could change user level, let's say zero
06:02and want to change then to be false.
06:05We could have done that as well.
06:06Let me just, again, just make the screen bigger
06:09so we could see everything at the same time.
06:12So we could see now, so I'm changing user level one,
06:14I'm changing user level two
06:16and we could comment that out
06:17and let's just trace out user one.
06:19And you could see that I forgot to put here a semicolon.
06:22And as we've said before,
06:23Flash doesn't really care about it.
06:25It's just a convention that it's a nice one to keep.
06:28So Flash is not going to give you any compiling errors
06:30if you don't put the semicolon,
06:31but if you notice that you haven't, put it back in.
06:35And if we run our application now that we've set zero and one,
06:38we'll see that Ben has no rights anymore, but Dan does.
06:42Okay, so we've seen now how we could approach our data
06:45in our previous example, we've seen it here as well.
06:48And we've seen how we could change our data as well.
06:51Now, if we wanted to, we could have created a function
06:53that now changes the value of the name,
06:56for example, if we want to change the user name.
06:59But that's easy enough.
07:00And that's something that you guys could play around with
07:02because it's basically the same thing
07:04as what we've done here only with the A users.
